Tool Bar
Feature | Tool Bar
- Polygon Select: Left click once on the model to select the first point, the second point, the third point, or more points. Double left click to finish selecting the polygon area.
- Square Select: Left-click and drag on the model to select a rectangular area.
- Lasso Select: Left-click and drag on the model to form a closed area, and select the closed area.
- Brush Select: Left-click and drag on the model to select the area where the brush will pass.
- Invert Select: select the opposite area of the current selection.
- Deselect: cancel the selection on the model.
- Delete: delete the selected area (red part).
Function Toolbar
2. Automatic filling hole : select the hole filling radius and click Apply
- Manual filling hole: select the hole to be filled and click filling hole.
3.Neck Edge Detect: After selecting the tooth position that neck edge line needs to be detected, edit the neck edge line on the model. Click the left mouse button to select the site and generate the neck edge line.
4.Undercut Detect: Adjust the prepared teeth to be tested to the direction of the in-position track, and click the 4th icon on the left to perform undercut detection. 0.00㎜ means that the tooth has no undercut, and 2.00㎜ means that the undercut is 2 mm.
5.Model Heal : Select the model to be healed and click the 5th icon . After the model is healed, it can effectively shorten the time for the file to be loaded into the design software after scanning is completed.
